£39.50 + VAT
/ Per Unit
Availability: In stock
Delivery: 2-3 days (average)
Right of Return: 30 days
Optional Insulation Board – designed to insulate below underfloor heating systems
Specification:
Minimum Order: 14 Boards
30-year guarantee on all heating mats and heating cables for tiles We are convinced of the quality of our products – That is why warm-on offers its customers a 30-year garantie* on all heating mats and heating cables from 24.04.2017. This service does not have to be paid additionally, but is covered by default with the purchase price.
Products that come with a 30-year guarantee are visibly marked as such in our store.
Conditions for making a guarantee claim:
The floor covering with the heating system installed under it is in normal use – it has not been lifted, repaired or replaced after installation of the heating system.
The product may only be installed by a licensed electrician.
The product must be registered with us within 30 days of purchase with a fully completed inspection report.
The appropriate registration form can be found here.
A copy of the invoice must be available
* Improper handling or installation by unauthorized personnel will result in immediate exclusion of the guarantee.
Legal guarantee
The legal guarantee period of 24 months from receipt of the goods applies to all articles. warm-on is liable for material defects according to the applicable legal regulations.
An additional guarantee exists for the goods delivered by warm-on only if this was expressly given in the order confirmation for the respective article.
The manufacturer guarantees the conformity of the heating mats with the design description under the assumption that the installation and operating instructions are observed. If a defect occurs within the guarantee period that can be traced back to faulty manufacture, the customer has the right to subsequent performance.
Damage due to improper handling, damage caused by someone else, incorrect installation (not following the instructions) or consequential damage is excluded from the guarantee. Please keep your proof of purchase.
Guarantee services will only be provided upon presentation of the proof of purchase.
Electric Underfloor Heating (UFH) Installation Checklist
Pre-Installation Checks:
✅ Verify floor suitability for UFH installation.
✅ Ensure proper insulation boards are available to prevent heat loss.
✅ Confirm heating system specifications comply with BS EN 60335-2-96.
✅ Check required IP rating for wet areas (IPX7 for Zone 1 & 2).
✅ Plan for thermostat placement (outside wet zones unless rated for in-zone use).
✅ Ensure heat-resistant cable is available for power connections.
Electrical Compliance:
✅ Installation must follow BS 7671:2018 (18th Edition Wiring Regulations).
✅ Install RCD (Residual Current Device) protection.
✅ Verify compliance with Part P of Building Regulations.
✅ Ensure work is carried out by a Part P-registered electrician or inspected by a competent person
scheme (NICEIC, ELECSA, NAPIT).
✅ Provide customer with user manual and maintenance guidelines.
This checklist ensures compliance with UK regulations while promoting safety,
Installation Process:
✅ Measure and mark the total heating area, excluding fixed furniture/appliances.
✅ Lay insulation boards securely before placing heating mats/cables.
✅ Follow manufacturer’s guidelines for cable/mat spacing.
✅Avoid overlapping heating mats and ensure proper floor sensor placement.
✅ Secure heating elements and connect them to the thermostat.
✅ Maintain a 5-10 cm perimeter gap from walls.
Testing & Certification:
✅ Perform continuity, resistance, and insulation resistance tests before and after installation.
✅ Register results with the supplier to guarantee warranty.
✅ Verify heating mat resistance against manufacturer’s specifications.
✅ Issue a Minor Electrical Installation Works Certificate (MEIWC) or Electrical Installation
Certificate (EIC).
✅ Register installation with Local Building Control, if required.
Post-Installation Checks:
✅ Ensure flooring is compatible with underfloor heating (BS 8204-1 & BS 8204-7).
✅ Verify heating controls are functional and programmed for efficiency.
✅ Ensure system integrates with Building Management Systems (BMS) if applicable.
Optional Insulation Board – designed to insulate below Underfloor Heating systems
Available in 3.0, 6.0 10.0, 20.0 & 25mm thickness – for tile floor finishes these insulation boards are bonded down to the subfloor using appropriate tile adhesive.
Specification:
Size: 1200 x 600m
Coverage: 0.72m² / Board
Available Thickness, 3.0, 6.0, 10.0, 20.0 & 25.0mm
High Compressive Strength of 30 Tonnes / m² (300kPa)
Thermal conductivity = 0.035 W/mK
Fire Classification = Euroclass E
Minimum Order: 14 Boards
Board colour may vary
3.0mm Boards are cut in half and supplied as 2 x 600x600mm boards (equalling 1200x600mm total). All other board sizes are despatched as 1 x 1200x600mm board.
Please reach out to us with any questions you may have, and we will get back to you promptly.
At THP UK LTD, we are proud to be a leading distributor of WARM-ON, your go-to brand for high-quality, safe, and comfortable living solutions. Whether you’re a homeowner or a business seeking the best in heating and electrical systems, WARM-ON offers a wide range of products designed for both residential and commercial applications, available for wholesale and retail purchase.
A Commitment to Safety and Value
As a distributor of WARM-ON, we are committed to upholding the brand’s core principles of safety, quality, and cost-effectiveness. All WARM-ON products are certified to meet international quality standards and adhere to stringent environmental management systems. By manufacturing their own products, WARM-ON guarantees superior reliability, safety, and performance in every solution they offer.
Comfort and Innovation at Competitive Prices
WARM-ON is dedicated to providing innovative, energy-efficient solutions that are both affordable and reliable. From electric heating systems for indoor and outdoor use to air conditioning, switches, and sockets, WARM-ON’s extensive product range is designed to enhance your living or working environment. With a focus on customer satisfaction, safety, and cost-efficiency, WARM-ON products offer the perfect balance of comfort and practicality.
Driving Innovation and Sustainability
WARM-ON continues to lead the market through its commitment to innovation and sustainability. The brand delivers high-quality products at competitive prices, backed by outstanding customer service and the latest digital technologies. Our knowledgeable team at THP UK LTD is here to assist with any inquiries or technical needs to ensure you find the perfect solution for your project.
With WARM-ON GmbH based in Germany, we proudly deliver throughout Europe, bringing you the finest in heating and electrical systems. Explore our range today and experience the perfect combination of safety, innovation, and comfort.
